Télécharger Imprimer la page

Delphi Diavia 1FI33500E Instructions De Montage page 75

Publicité

FIG. 60
SOLO PER DUCATO 2.8 JTD / BOXER 2.8 HDI / JUMPER
I
2.8 HDI
Vista dei tubi gas 1/2" EC e 13/32" CC diretti e collegati al com-
pressore «13». Bloccare tra loro tubi gas in esame, nella
posizione di figura, mediante fermatubi «73-82
SEULEMENT POUR DUCATO 2.8 JTD / BOXER 2.8 HDI /
F
JUMPER 2.8 HDI
Vue des tuyaux gaz 1/2" EC et 13/32" CC dirigés et connectés
au compresseur «13». Fixer les tuyaux gaz en question entre-
eux, comme indiqué sur la figure, à l'aide des fixations tuyaux
«73-82».
ONLY FOR DUCATO 2.8 JTD / BOXER 2.8 HDI / JUMPER
GB
2.8 HDI
View of the 1/2" EC and 13/32" CC gas hoses running and
connected to compressor «13». Lock the gas hoses together
in the position indicated in the figure using the hose clamps
«73-82».
NUR FÜR DUCATO 2.8 JTD / BOXER 2.8 HDI / JUMPER 2.8
D
HDI
Ansicht des zum Kompressor «13» gerichteten und daran an-
geschlossenen 1/2" EC und 13/32" CC Kältemittelschlauchs.
Untereinander die genannten Kältemittelschläuche in Position
der Abbildung mit Schlauchbindern «73-82» festziehen.
SOLO POR DUCATO 2.8 JTD / BOXER 2.8 HDI / JUMPER
E
2.8 HDI
Vista de los tubos gas 1/2" EC y 13/32" CC dirigidos y conecta-
dos al compresor «13». Bloquear los tubos gas examinados
entre si, en la posición de figura, mediante detiene tubos «73-
82».
73

Publicité

loading

Produits Connexes pour Delphi Diavia 1FI33500E

Ce manuel est également adapté pour:

Diavia 1fi32400e/1Diavia 1fi30400e/1