oventrop Unibox T-RTL R-Tronic Notice D'utilisation page 38

Appendix
QUESTION
38
RESPONSE
- The volume flow and pressure loss may increase.
- Observe the pressure loss and noise characteristics of the
radiator fittings.
- Adjust the bypass valve so that a sufficient quantity of water
passes through the surface temperature balance circuit.
- No noise must be perceivable at the radiator when closing
the valve.
Option 3:
1
Illust. 16: Connection with "Unibox RLA"
(1) "Unibox RLA"
(2) Bypas valve
- The volume flow and pressure loss may increase.
- Observe the pressure loss and noise characteristics of the
radiator fittings.
- Adjust the bypass valve of the "Unibox RLA" so that a suffi-
cient quantity of water passes through the surface tempera-
ture balance circuit.
Unibox T-RTL R-Tronic
2
102273780-V01.09.2019