Troubleshooting - Oventrop Unibox T-Rtl R-Tronic Notice D'utilisation

Troubleshooting

9. Troubleshooting
MALFUNCTION
The surface temperature
balance circuit does not get
warm.
34
CAUSE
Problems with the heating
system/heat generator.
The Duo connection piece for
two heating circuit is being
used (see Illust. 13 on page
36).
Unibox T-RTL R-Tronic
REMEDY
Increase the pump output (if
possible).
Check the resistances of the
heating circuits. All heating
circuits must have the same
resistance.
102273780-V01.09.2019