Appendix; Faqs - Oventrop Unibox T-Rtl R-Tronic Notice D'utilisation

Appendix

12. Appendix

12.1 FAQs

QUESTION
Is it possible to connect two
heating circuits to one "Uni-
box T-RTL R-Tronic"?
How many m² of temperature
balance surface can be con-
nected to the "Unibox T-RTL
R-Tronic"?
36
RESPONSE
Yes, use a"Duo connection piece" to connect two heating cir-
cuits of the same length to one "Unibox T-RTL R-Tronic". Each
surface temperature balance circuit may have a maximum pipe
length of 80 m, provided you use 16/17 mm pipes.
Illust. 13: Connection scheme of two heating circuits with "Duo
connection piece"
You can connect a surface covering approximately 20 m² per
"Unibox T-RTL R-Tronic". The pipe length must not exceed 100
m when using a 17 mm pipe.
Unibox T-RTL R-Tronic
102273780-V01.09.2019