Setting The Controls; Using The Self-Cleaning Cycle - Whirlpool GW395LEGB1 Mode D'emploi

S
ETTING THE CONTROLS
To start cleaning immediately:
1.
Press the CLEAN button.
A 3 1 ⁄ -hour Self-Cleaning cycle will be set. (The
2
first 3 hours are for cleaning, the last 30 minutes
are for cooling.)
2.
Setting the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3 1 ⁄ hours, use the hour and minute
2
buttons to set the cleaning time you want. Press
the up or down
between 2 1 ⁄ -4 1 ⁄ hours on the display.
2 2
3.
Start oven.
NOTE: The door will lock right after you press
START.
4.
When the Self-Cleaning cycle ends...
"LOCKED" goes off and the door unlocks.
To delay cleaning start time:
1.
Press the CLEAN button.
A 3 ⁄ -hour Self-Cleaning cycle will be set. (The
1
2
first 3 hours are for cleaning, the last 30 minutes
are for cooling.)
2.
Setting the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3 1 ⁄ hours, use the hour and minute
2
buttons to set the cleaning time you want. Press
the up or down
between 2 1 ⁄ -4 1 ⁄ hours on the display.
2 2
button(s) to set a time
button(s) to set a time
PRESS YOU SEE
CLEAN
PRESS YOU SEE
HR MIN
(example for 4 hours,
30 minutes cleaning time)
PRESS YOU SEE
START
HEAT
TIMED
YOU SEE
PRESS YOU SEE
CLEAN
PRESS YOU SEE
HR MIN
(example for 4 hours,
30 minutes cleaning time)

USING THE SELF-CLEANING CYCLE

CLEAN
TIME
CLEAN
TIME
ON
LOCKED CLEAN
TIME
CLEAN
CLEAN
TIME
CLEAN
TIME
25