Removing The Storage Drawer; Replacing The Storage Drawer; Sweep -Thru Base - Whirlpool GW395LEGB1 Mode D'emploi

T
HE STORAGE DRAWER
You can remove the storage drawer to make it
easier to clean under the range and to check for
installation of the anti-tip bracket. Use care when
handling the drawer.

Removing the storage drawer:

1.
Empty drawer of any pots and pans before re-
moving drawer. Use recessed area on top edge
of drawer to pull drawer straight out to the first
stop. Lift front and pull out to the second stop.
2.
Lift back slightly and slide drawer all the way
out.

Replacing the storage drawer:

1.
Fit ends of drawer slide rails into the drawer
guides on both sides of opening.
2.
Lift drawer front and press in until metal stops
on drawer slide rails clear white stops on drawer
guides. Lift drawer front again to clear second
stop and slide drawer closed.
S -T B
WEEP HRU
The sweep-thru base is designed to allow easy
cleaning under the range. It also allows better
access to the leveling legs once the range has
been set in place.
To sweep underneath the range, simply remove the
storage drawer (See instructions above for
removing the storage drawer).
ASE
Sweep-thru base
USING YOUR RANGE
Drawer
slide rail
23