Assembly; Completeness; Loading; Loading Sequence - iTD uni-cart Mode D'emploi

Assembly

2 Assembly
2.1

Completeness

Unpack uni-cart, pro-cart, duo-cart, compact-cart, classic-cart or endo-cart carrier system and
check wether all the parts you have ordered have been included in the consignment.
2.2

Loading

Place the uni-cart, pro-cart, duo-cart, compact-cart, classic-cart or endo-cart carrier system
on a level surface. Place the equipment in the cart. Loading and assembly may only be effected if
cart is separated from current.
We recommend the optional accessory (e.g. tension belt) to be applied for the safety of each
appliance.
2.3

Loading sequence

Make sure that all the equipment placed on the uni-cart, pro-cart, duo-cart, compact-cart,
classic-cart or endo-cart carrier system is stowed securely to prevent slipping, tipping, falling
down, etc. by taking appropriate measures (especially also during transport). It is advisable to
position all heavy components on the uni-cart, pro-cart, duo-cart, compact-cart, classic-cart or
endo-cart carrier system using two people. You should take into account the fact that the centre
of gravity changes with the loading.
•
The cart should be loaded in the following sequence:
•
shelves and drawers from the bottom to top
support arms should be loaded last.
•
The cart should be unloaded in the following sequence:
•
Loads should be removed from support arms first
shelves and drawers should be unloaded from top to bottom.
If you attempt to move the equipment to a different floor in the building without using a lift,
the carrier system should be dismantled into individual transportable components.
34