Maintenance - JOBOBIKE Be Electric Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Park indoors when possible. If you must park outdoors in rain or wet conditions, you should leave your E-bike outside for only a few
hours and then park it in a dry location as soon as possible to allow the entire system to dry out. Compared to a regular bike, an E-
bike used in wet conditions needs more frequent maintenance to prevent rust and corrosion to make sure that all systems are
working safely.
• Locking up your bike is recommended so that your bike is secure and the chance of theft is reduced. We do recommend you to
take appropriate precautions to keep your bike safe from theft.
• Do not park, store, or transport your bike on a rack not designed for the bike's size and weight.
• Use a rack compatible with the width of tires of your bike. Some racks may not accommodate all tire widths.
• When storing your bike or carrying your bike on a rack for transport, unlock, remove the key, then remove the battery to reduce
the weight of the bike, which makes lifting and loading easier and protects the battery by transporting it in the cab of a vehicle.
• Avoid transporting E-bikes on a vehicle rack during rain, as this may cause water damage to the electrical components.

Maintenance

Basic Bike Care
To ensure safe riding conditions, you must maintain your bike properly. Follow these basic guidelines and see a certified bike
mechanic at regular basis to ensure your bike is safe for use and comfortable to ride. See the Safety Checklist and Recommended
Service Intervals sections of this manual for more detailed information.
• Properly maintain batteries by keeping them fully charged when there are two weeks or longer between uses. See Long-Term
Battery Storage section of this manual for information on storing the battery for longer than two weeks between rides.
• Never immerse or submerge the bike or any components in any liquid as the electrical system may be damaged.
• Periodically check wiring and connectors to ensure that the connectors are secure without damages.
36

Publicité

Table des Matières
loading

Table des Matières