General Information - JOBOBIKE Be Electric Manuel Du Propriétaire

General Information

Vehicle Category
The EDDY E-bike is a 250 watt (W) e-bike.
E-bikes should be operated according to legal regulations made by laws of each country.
So, you are obliged to follow the regulations of your country.
Mandatory Equipment and Locations
Before each ride, make sure that you are following all laws pertaining to using an E-bike in your region with all required safety
equipment set up. For example, the laws may include requirements of certain mandatory equipment, guides for the use of hand
signals, and limitations on where you are allowed to ride an E-bike.
Assembly and Fit
Correct assembly and fit are essential to ensure your safety and comfort. If you have the experience, skills, and tools to assemble
your bike before the first ride, JOBOBIKE recommends having a certified bike mechanic to check your work.
NOTICE:
If you do not have the experience, skill, or tools to assemble the bike, JOBOBIKE highly recommends having a certified bike mechanic
to complete the assembling procedures as well as any future adjustments or tuning for you.
NOTICE:
A critical aspect of assembling your JOBOBIKE is securing the front wheel and checking the tightness of the rear wheel axle nuts. All
JOBOBIKEs use quick-release front wheels with bolt on rear wheels. These mechanisms may become less secured during shipment
and after use. The security and torque of all wheel mounting hardware should be inspected upon arrival as well as on a regular basis.
Both wheels must be properly secured before operating your bike.
5