Assembly Instructions
NOTICE:
The following steps are only a general guide to assist the assembling process of your E-bike and is not a complete or comprehensive
manual of all aspects of assembly, maintenance, and repair. We recommend you to consult a certified bike mechanic to assist in
the assembly, repair, and maintenance of your E-bike.
Step 1
Unpack the bike.
Open the bike box and remove the small box inside. With the help of someone who is capable of safely lifting a heavy object, remove
the E-bike from the bike box. Carefully remove the packaging materials protecting the bike frame and all other components. Please
recycle packaging materials, especially the cardboard and the foam. Open the small box and carefully set out all contents.
The following should be included with the EDDY JOBOBIKE:
•
Front Wheel
•
Manual
•
Assembly Toolkit
•
Front Fender and Rear Fender (installed)
•
Front wheel axle
If there are any missing parts, please contact Jobobike.
•
Charger
•
Keys (2 identical)
•
Headlight
•
Pedals
11