JOBOBIKE Be Electric Manuel Du Propriétaire page 87

Switching Push-assistance Mode On/Off
To activate the push-assistance function, hold the "-" button. After 2s, The E-bike is activated at a uniform speed
of 6 Km/h while the screen displays "
the operating unit. The E-bike system stops the power output immediately.
Walk mode should be used only when the rider is off the seat with both hands on the handlebar. Always keep at
least one hand on a brake lever to allow quick cutoff of the motor if necessary and to maintain control of the bike.
". The push-assistance function is switched off as soon as you release the "-" button on
30