JOBOBIKE Be Electric Manuel Du Propriétaire page 86

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Start-Up Procedure After the bike has been properly assembled following the assembly video, all components are secured correctly,
and you have read this entire manual, you may turn on the bike and select a power level following the steps outlined below:
Switching the E-bike System On/Off
Press the power button to turn on the E-bike system.
When holding the power button for 2s, the E-bike system would be switched off. When turned off, the E-bike system no longer uses
battery power.
When parking the E-bike for more than 10 minutes, the E-bike system switches off automatically.
Display Interface
After switching on the E-bike system, the display shows Speed and Trip Distance as default.
Briefly press the "i" button to switch between following elements:
Trip(Km) →ODO (Km)→Max. Speed (Km/h)→ Avg. Speed (Km/h) →Tim
Display Indication Cycle Interface
29

Publicité

Table des Matières
loading

Table des Matières