JOBOBIKE Be Electric Manuel Du Propriétaire page 79

moving or riding the bike. Before each ride, visually inspect the frame for proper alignment and ensure that all hardware is
properly secured.
Folding Handlebar Stem Features
1. Release (red button/lever)
2. Hex Bolt Set Screw (2.5 mm)
3. Hex Bolt (7 mm)
4. Rolling Pin
5. Rolling Pin Set Screw (2 mm)
Folding Handlebar Stem Operation
Securing the Handlebar Stem in the Unfolded (Ready to Ride) Position:
1. Align the handlebar so that it is upright with the hinge closed; be cautious to keep fingers, clothes,
and everything else away from the clasp.
2. Fold the stem clasp release lever up and press it towards the stem until the release lever clicks
into place. Properly secured, the stem clasp should not move
Folding the Handlebar Stem for Storage:
1. Press and hold the red button on the stem clasp release lever and push the stem clasp down at the same
time.
2. Fold the handlebar stem to the side, hinging away from the clasp.
When properly secured, the stem clasp should not move. if the clasp moves when locked, make sure
to tighten it.
Before each ride, visually inspect the handlebar for proper alignment and ensure that all hardware is
properly secured
22