Roger Technology H70/200AC Instructions Et Consignes Pour L'installateur page 73
Masquer les pouces
Voir aussi pour H70/200AC:
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
N.B.
HW version.
Year of manufacture.
Week of manufacture.
Serial number.
FW version.
View manoeuvre counter
The number consists of the values of the parameters from
N.B.
Manoeuvres performed.
Example
x100 = 12.300 manoeuvres.
View manoeuvre hour counter
The number consists of the values of the parameters from
N.B.
Manoeuvre hours.
= 123 hours.
View control unit days on counter
The number consists of the values of the parameters from
N.B.
Days with unit switched on.
= 123 days.
Password
Setting a password prevents unauthorised persons from accessing the settings.
With password protection active ( =
Only a single password is used to control access to the gate automation system.
WARNING: Contact the Technical Support Service if you lose your password.
Password activation procedure:
• Enter the desired values for parameters
• Use the UP
and/or DOWN
• Press and hold the + and - buttons for 4 seconds.
•
• Switch the control unit off and on again. Check that password protection is activated ( =
Temporary unlock procedure:
• Enter the password.
• Check that
=
.
Password cancellation procedure:
• Enter the password (
• Save the values
,
,
• Use the UP
and/or DOWN
• Press and hold the + and - buttons for 4 seconds.
•
and
indicate that no password is set).
• Switch the control unit off and on again (
Changing password
Protection deactivated.
Protection activated.
,
,
buttons to view the parameter
=
).
,
=
buttons to view the parameter
=
).
to
to
multiplied by 100.
to
.
to
.
and
.
.
.
.
).
,
,
73
Publicité
Table des Matières
