BFT CAPRI-TCA Instructions D'utilisation Et D'installation page 11

personnel regularly. The materials making up the set and its packing must
be disposed of according to the regulations in force.
Batteries must be properly disposed of.
15) SUMMARY OF DIP-SWITCH FUNCTIONS
The control unit comprises 8 dip-switches, which allow to select the operation
modes according to the table given below:
N°DIP Description
1,2,3 TCA
4 Open/closed loop (for ma-
ster boards only, leave Off
for slave boards)
5 Master / Slave
6,7,8 Zone address
0,0,0
0,0,1
0,1,0
0,1,1
1,0,0
1,0,1
1,1,0
1,1,1
The descriptions and illustrations contained in the present manual are
not binding. The Company reserves the right to make any alterations
deemed appropriate for the technical, manufacturing and commercial
improvement of the product, while leaving the essential product fea-
tures unchanged, at any time and without undertaking to update the
present publication.
INSTALLATION MANUAL
Function
See paragraph 7.
ON: The connections
marked with a broken line in
fig. 4 have been made, the
advanced statistics are being
managed.
OFF: The connections
marked with a broken line in
fig. 4 have not been made, the
advanced statistics are not
being managed.
ON: The board sends global
and zone commands to the
telephone pair.
OFF: The board performs the
global and zone commands
received by the telephone
pair.
0=OFF, 1=ON
All system
Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
ENGLISH
11
CAPRI-TCA - Ver. 03 -