3M 6300 Mode D'emploi page 122

TECHNICAL SPECIFICATION
Respiratory Protection From AS/NZS 1715 - for use with
3M approved bayonet filters to AS/NZS 1716.
When used with the following 3M equipment, this
respirator can be used in concentrations of contaminant
up to:
3M™ Re-usable Half Maximum Exposure
Mask with Limitations
P1 Particulate Filters 10 x ES*
P2 Particulate Filters 10 x ES*
P3 Particulate Filters 50 x ES*
Class 1 Gas & Vapour 10 x ES* or 1000 ppm
Filters (whichever is lower)
Class 2 Gas & Vapour 10 x ES* or 1000 ppm
Filters (whichever is lower)
3M™ Air Supply Unit 50 x ES*
ES – Exposure Standard
Flow Characteristics
Maximum Flow - See appropriate User Instructions.
Maximum Operating Temperature: +40 °C. Care should
be taken when using the equipment at low temperatures
as excessive moisture may cause the valves to freeze.