Knick ProLine P50000 Manuel Utilisateur page 75

Specifications
Standards and Approvals
Mechanical load
EMC
Fire protection
UL
RoHS conformity
Further Data
MTBF
Weight with /
without covers
Input protection
Output protection Output terminals under protective
Encapsulation
Mounting
Maintenance
Disposal
For terminal assignments and cross-sections, see Commissioning chapter,
page 66.
EN 61373
(shock and vibration)
Certified by an independent test laboratory
EN 50121-1, EN 50121-3-2 (railway applications)
EN 61326-1 (product standard)
AC power supply:
AC and DC power supply:
Certified by an independent test laboratory
EN 45545-2 (NF F 160-101/-102)
Outdoor applications up to HL 3
Certified by an independent test laboratory
UL 347 listed in E356768
According to directive 2011/65/EU
155 / 131 years 40 °C / 45 °C average ambient temperature, continuous
operation, stationary operation in well-kept rooms, no
ventilation, EN 61709 (SN 29500)
Deviating MTBF values for operation on rolling stock
approx. 780 g / 650 g
High voltage terminals under pro-
tective cover, with rubber sleeves
over high voltage cables
Without protective covers
cover
Without protective covers
Electronics completely encapsulated by potting with a silicone-free
polyurethane casting resin
on a metallically conductive or non-conductive surface using 4 screws
(see dimension drawings for hole pattern)
on a 35 mm DIN rail acc. to EN 60715
The devices are maintenance-free.
at waste management facility in accordance with local regulations
Category 1, Class B
Emitted interference acc. to Class B
Emitted interference acc. to Class A
IP54 acc. to EN 60529
IP00
IP51 acc. to EN 60529
IP20
75