Turning On And Off; Cleaning And Servicing; Cleaning; Storage - Parkside PWS 125 B2 Traduction Du Mode D'emploi D'origine

GB
The grinding disc nut must not be
screwed too tightly in order to avo-
id breaking the disc and nut.

Turning on and off

Make sure that the power supply
voltage matches the voltage rating
indicated on the device's type pla-
te.
Connect the machine to the power
supply.
1. Press the on switch (4) to start the de-
vice. Press the on/off switch (5).
2. To turn it off, release the on-off button.
The device turns off.
After switching on the device, wait until the
device has reached its max. speed. Only
then should you start with the work.
The disc still runs even after
the device has been switched
off. Risk of injury.
Trial run:
Always carry out a trial run before carry-
ing out your first grinding procedure and
after every disc replacement. Switch the
device off immediately if the grinding disc
is not rotating smoothly, if considerable
vibration occurs or if you hear abnormal
noises.

Cleaning and servicing

Pull the mains plug before any ad-
justments, maintenance or repair.
54
All manuals and user guides at all-guides.com
Always check the device before using it for
obvious deficiencies such as loose, worn
or damaged parts, correct the positioning
of screws or other parts. Examine the
grinding disc in particular. Exchange the
damaged parts.

Cleaning

• Thoroughly clean the device after every
• Clean the ventilation openings and the

Storage

• Store the appliance in a dry place well
• Grinding discs must be dry and stored
Have any work on the device
that is not described in this in-
struction guide performed by
a professional. Only use ori-
ginal parts. Allow the device
to cool off before any mainte-
nance or cleaning is underta-
ken. There is a risk of burning!
Do not use any cleaning agent or
solvent. Chemical substances can
etch the plastic parts of the device.
Never clean the device under run-
ning water.
use.
surface of the device with a soft brush
or cloth.
out of reach of children.
upright and should never be stacked.