Remote Controller; Main Elements And Features; Rm-Rk50 - JVC KD-DB101 Manuel D'instructions

Remote controller —
This unit can be remotely controlled as instructed here
(with an optionally purchased remote controller). We
recommend that you use remote controller RM-RK50
with your unit.
Installing the lithium coin battery
(CR2025)
Aim the remote controller directly at the remote
sensor on the unit. Make sure there is no obstacle
in between.
Warning:
• Do not install any battery other than CR2025 or its
equivalent; otherwise, it may explode.
• Do not leave the remote controller in a place
(such as dashboards) exposed to direct sunlight
for a long time; otherwise, it may explode.
• Store the battery in a place where children cannot
reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
– Do not leave the battery with other metallic
materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate when
throwing away or saving it.

Main elements and features

RM-RK50

1
• Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
2 5
U (up) / D (down)
• Changes the FM/AM/DAB bands with
• Changes the preset stations and preset DAB
services with D
• Changes the folder of the MP3/WMA discs.
3
VOL – / VOL + buttons
• Adjusts the volume level.
4
SOUND button
• Selects the sound mode (C-EQ: custom
equalizer).
5
SOURCE button
• Selects the source.
6 2
R (reverse) / F (forward)
• Searches for stations and DAB services if pressed
briefly.
• Searches for DAB ensembles if pressed and held.
• Fast-forwards or reverses the track if pressed and
held.
• Changes the tracks if pressed briefly.
(standby/on/attenuator) button
∞
buttons
∞
.
3
buttons
5
U.
17