Remote Controller - JVC KD-DV5202 Manuel D'instructions

Remote controller —
Installing the lithium coin battery
(CR2025)
Before using the remote controller:
Aim the remote controller directly at the remote
sensor on the unit. Make sure there is no
obstacle in between.
Do not expose the remote sensor to strong light
(direct sunlight or artificial lighting).
Warning:
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it may
explode.
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble,
heat the battery, or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
8
Remote sensor
RM-RK230
Main elements and features
IMPORTANT:
If Dual Zone is activated (see page 35),
the remote controller only functions for
operating the DVD/CD player.
MONITOR CONTROL
1 Monitor control buttons
• Used for a JVC monitor—KV-MR9010
or KV-MH6510.
DVD/RECEIVER CONTROL
2
(standby/on attenuator) button
• Turns the power on if pressed briefly or
attenuates the sound when the power is
on.
• Turns the power off if pressed and held.
3 SOURCE button
• Selects the source.
4 BAND button
• Selects the FM/AM/DAB bands.