More About This Unit - JVC KD-DV5202 Manuel D'instructions

More about this unit

Basic operations
Turning on the power
• By pressing SOURCE on the unit, you can
also turn on the power. If the source is ready,
playback also starts.
Turning off the power
• If you turn off the power while listening to a
disc, disc play will start automatically, next
time you turn on the power.
Tuner operations
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and
stations are stored newly.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in
No. 1 will be automatically tuned in.
• When storing a station manually, the
previously preset station is erased when a new
station is stored in the same preset number.
FM RDS operations
• Network-Tracking Reception requires two
types of RDS signals—PI (Programme
Identification) and AF (Alternative
Frequency) to work correctly. Without
receiving these data correctly, Network-
Tracking Reception will not operate correctly.
• If a Traffic Announcement is received by
TA Standby Reception, the volume level
automatically changes to the preset level (TA
VOL) if the current level is lower than the
preset level.
• When Alternative Frequency Reception
is activated (with AF selected), Network-
Tracking Reception is also activated
automatically. On the other hand, Network-
Tracking Reception cannot be deactivated
without deactivating Alternative Frequency
Reception. (See page 40.)
• If you want to know more about RDS, visit
«http://www.rds.org.uk».
52
Disc operations
General
• In this manual, words "track" and "file" are
interchangeably used when referring to MP3/
WMA files and their file names.
• This unit can also playback 8 cm discs.
• This unit can only playback audio CD
(CD-DA) files if different type of files are
recorded in the same disc.
Inserting a disc
• When a disc is inserted upside down,
"PLEASE" and "EJECT" appear alternately
on the display. Press 0 to eject the disc.
Playing a DVD-R/-RW, +R/+RW or
CD-R/-RW
• Use only "finalized" discs.
• This unit can play back only the files of the
same type which is first detected if a disc
includes both audio CD (CD-DA) files and
MP3/WMA files.
• Only for CD-R/-RW: This unit can play
back multi-session discs; however, unclosed
sessions will be skipped while playing.
• Some DVD-R/-RW, +R/+RW, or CD-R/-RW
may not play back on this unit because
of their disc characteristics, and for the
following causes:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the unit.
– The pickup lens inside the unit is dirty.
– CD-R/-RW on which the files are written
with "Packet Write" method.
– DVD-R/-RW, +R/+RW which are not
written in UDF-Bridge Format (eg. UDF
format or ISO format).
– There are improper recording conditions
(missing data, etc.) or media conditions
(stained, scratched, warped, etc.).