General Settings - Psm - JVC KD-DB101 Manuel D'instructions

General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2
Select a PSM item.
Indications
DEMO
Display demonstration
CLK DISP * 1
Clock display
CLOCK H
Hour adjustment
CLOCK M
Minute adjustment
24H/12H
Time display mode
CLK ADJ
Clock adjustment
* 1
If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select "OFF" to
save the car's battery.
14
Item Selectable settings, [reference page]
( : Initial)
• DEMO ON : Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [5].
• DEMO OFF : Cancels.
• ON : Clock time is shown on the display at all times when the power is
turned off.
• OFF : Cancels; pressing DISP will show the clock time for about
5 seconds when the power is turned off, [5].
0 – 23 (1 – 12) [Initial: 0 (0:00)], [5].
00 – 59 [Initial: 00 (0:00)], [5].
• 24H : See also page 5 for setting.
• 12H
• AUTO : The built-in clock is automatically adjusted using the CT (clock
time) data in the RDS signal.
• OFF : Cancels.
3
Adjust the PSM item selected.
4
Repeat steps and
2
items if necessary.
5
Finish the procedure.
to adjust other PSM
3