General Settings - Psm - JVC KD-AR270 Manuel D'instructions

General settings — PSM
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2
Select a PSM item.
Indications
DEMO
Display
demonstration
CLOCK H
Hour adjustment
CLOCK M
Minute adjustment
DIMMER
Dimmer
SCROLL 1
*
Scroll
WOOFER 2
*
Subwoofer cutoff
frequency
1
* Some characters or symbols will not be shown correctly (or will be blanked) on the display.
2
* Displayed only when "L/O MODE" is set to "WOOFER."
10
Selectable settings, [reference page]
DEMO ON : [Initial]; Display demonstration will be activated
automatically if no operation is done for about 20 seconds,
[5].
DEMO OFF : Cancels.
1 – 12, [5]
[Initial: 1 (1:00)]
00 – 59, [5]
[Initial: 00 (1:00)]
ON :
Dims the display illumination of this unit.
OFF :
[Initial]; Cancels.
ONCE :
[Initial]; Scrolls the disc information once.
AUTO :
Repeats scrolling (5-second intervals in between).
OFF :
Cancels.
• Pressing DISP for more than one second can scroll the display regardless
of the setting.
LOW :
Frequencies lower than 55 Hz are sent to the subwoofer.
MID :
[Initial]; Frequencies lower than 85 Hz are sent to the
subwoofer.
HIGH :
Frequencies lower than 115 Hz are sent to the subwoofer.
3
Adjust the PSM item selected.
4
Repeat steps and
2
PSM items if necessary.
5
Finish the procedure.
to adjust other
3