Sound Adjustments; Adjusting The Sound - JVC KD-AR270 Manuel D'instructions

Sound adjustments

You can select a preset sound mode suitable to
the music genre (C-EQ: custom equalizer).
Ex.: When "ROCK" is selected
Preset values
Indication (For)
USER
(Flat sound)
ROCK
(Rock or disco music)
CLASSIC
(Classical music)
POPS
(Light music)
HIP HOP
(Funk or rap music)
JAZZ
(Jazz music)
BAS TRE LOUD
(bass) (treble) (loudness)
00 00 OFF
+03 +01 ON
+01 –02 OFF
+04 +01 OFF
+02 00 ON
+02 +03 OFF

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
* Displayed only when "L/O MODE" is set to
"WOOFER" (see page 11).
Indication, [Range]
BAS* 2 (bass), [–06 to +06]
Adjust the bass.
TRE* 2 (treble), [–06 to +06]
Adjust the treble.
FAD* 3 (fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL* 4 (balance), [L06 to R06]
Adjust the left and right speaker balance.
LOUD* 2 (loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a
well-balanced sound at low volume level.
SUB. W* (subwoofer), [00 to 08]
5
Adjust the subwoofer output level when a
subwoofer is connected.
VOL (volume), [00 to 30 or 50*
Adjust the volume.
2
* When you adjust the bass, treble, or loudness,
the adjustment you have made is stored for
the currently selected sound mode (C-EQ)
including "USER."
3
* If you are using a two-speaker system, set the
fader level to "00."
4
* This adjustment cannot affect the subwoofer
output.
5
* This takes effect only when a subwoofer is
connected.
6
* Depending on the amplifier gain control
setting. (See page 11 for details.)
6 ]
9