Radio Operations; Storing Stations In Memory; Fm Station Automatic Presetting - JVC KD-DB101 Manuel D'instructions

Radio operations

~
Ÿ
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
!
Start searching for a station.
To tune in to a station manually
!
In step above...
1
2
Select a desired station frequency.
6
88.3
When a station is received,
searching stops.
To stop searching, press the
same button again.
M
When an FM stereo broadcast is hard to receive
Lights up when monaural mode is activated.
MONO
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure. "MONO OFF" appears and the MO indicator
goes off.

Storing stations in memory

You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1
Select the FM band (FM1 – FM3) you want to
store into.
2
3
"SSM" flashes, then disappears when automatic
presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM band.
SSM