Other External Component Operations - JVC KD-DB101 Manuel D'instructions

Indications
AUX ADJ
Auxiliary input level
adjustment
TAG DISP
Tag display
AMP GAIN
Amplifier gain control

Other external component operations

You can connect an external component to AUX
(auxiliary) input jack on the control panel.
• For connection, see Installation/Connection Manual
(separate volume).
Connecting an external component to the
AUX input jack
Digital Audio Player, etc.
~
Ÿ
Turn on the connected component and
start playing the source.
16
Item Selectable settings, [reference page]
( : Initial)
A.ADJ 00 : Adjust the auxiliary input level to match the FM sound level and
— A.ADJ 05 store it in memory.
• TAG ON : Shows the Tag information while playing MP3/WMA tracks, [12].
• TAG OFF : Cancels.
• LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power of the speaker
is less than 50 W to prevent them from damaging the speaker.)
• HIGH PWR : VOL 00 – VOL 50
Stereo mini plug
!
Adjust the volume.
⁄
Adjust the sound as you want. (See
page 13.)
To check the other information while
listening to an external component
AUX IN
Ô
Clock