Ryobi RLT430CESD Traduction Des Instructions Originales page 6

4. Primer bulb
5. Knob
6. Grass deflector
7. String head
8. Drive shaft housing
9. Coupler
10. Front handle
11. Ignition switch
12. Trigger lock
13. Starter grip and rope
14. Choke lever
SYMBOL
Safety alert
Please read the instructions carefully
before starting the product.
Beware of thrown or ying objects. Keep
all bystanders, especially children and
pets, at least 15 m from the operating
area.
This product is not intended for use with
a toothed saw type blade.
Rotational direction and maximum
speed of the shaft for the cutting
10,000
attachment.
PRIME - press the primer bulb 10 times
slowly.
Pull the starter rope.
Run position
Half choke position
Full choke position
To stop the unit: Place the ignition switch
to the "O" position.
Keep hands away from blades.
4
To reduce the risk of injury or damage,
avoid contact with any hot surface.
Use 4-stroke lubricant for air cooled
engines.
CE Conformity
EurAsian Conformity Mark
10
Ukrainian mark of conformity
Guaranteed sound power level.
110
Wear eye, ear and head protection.
Do not use blade(s) on the product.
Squeeze throttle trigger to start/run.
Wait 10 seconds.
Open the oil dip stick, pour 65 ml 20W-50
fresh oil with funnel.
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.
English