FAS International SKUDO Mode D'emploi page 61

SKUDO – Issue 00
1 Main board: is situated inside the coin mechanism box and manages the various functions of the
vending machine.
2 Refrigeration unit: is installed at the bottom of the cabinet, behind the collection pocket; it keeps
the internal temperature of the vending machine at the set value.
3 Electric panel: All the electrical connections, the power boards and the fuses are housed in the
electric panel which is located in the lower part of the cabinet, behind the collection pocket. It is
fitted with a safety switch which cuts out the voltage to the machine's electrical system when the
special red key is removed from the slot.
4 Door micro: sends a "door open" signal to the board.
5 Coin box
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
5 INTERNAL PARTS
fig. 2
11
E
N
G
L
I
S
H