Introduction - Corghi LaserLine EM 9550 Manuel D'utilisation

INTRODUCTION

The purpose of this manual is to provide the
owner and operator with effective and safe
instructions for the use and maintenance of the
wheel balancer.
Following these instructions carefully will ensure
that the machine gives you the effective and long-
lasting service that has always distinguished our
products, contributing considerably to making
you job easier.
The following paragraphs define the levels of
danger regarding the machine, associated with
the warning captions found in this manual.
DANGER
Refers to immediate danger with the risk of
serious injury or death.
WARNING
Dangers or unsafe procedures that can cause
serious injury or death.
CAUTION
Dangers or unsafe procedures that can cause
minor injuries or damage to property.
Read these instructions carefully before starting
the machine. Keep this manual and all illustrative
material supplied with the machine in a folder
near it where it is readily accessible for consulta-
tion by the operators.
The technical documentation supplied is con-
sidered an integral part of the machine; in the
event of sale all relative documentation must
remain with the machine.
The manual is only valid for the machine model
and serial number indicated on the nameplate
applied to the machine itself.
WARNING
Comply with the contents of this manual: any
uses of the machine that are not specifically
described are under the full responsibility of
the operator.
42
Note
Some of the illustrations contained in this
booklet have been taken from pictures of pro-
totypes: standard production machines may
differ slightly in certain respects.
These instructions are for the attention of
personnel with basic mechanical skills. We
have therefore condensed the descriptions of
each operation by omitting detailed instruc-
tions regarding, for example, how to loosen
or tighten the fixing devices. Do not attempt
to perform operations unless properly quali-
fied or with suitable experience. If necessary,
please contact an authorised Service Centre
for assistance.
EM 9550 - Operator's manual