System Overview Flushing Device Sa-2020Pro; Technical Specifications; Structure Of The Flushing Device - ELECTOR SA-2020pro Manuel De L'utilisateur

SA-2020pro
Chapter 2 - System Overview

2.1 System overview flushing device SA-2020pro

2.1.1 Technical specifications

Operating temperature .............................................4 - 60°C
Operating pressure ..................................................6 bar max.
Air pressure ............................................................6 bar max.
Weight ....................................................................12.5 kg
Dimensions (B x T x H) ...........................................65 x 17,5 x 62 cm
Material pipeline and fittings ....................................PVC-U
Material frame .........................................................Stainless steel 1.4301
Nominal size of the pipeline .....................................d25 x 1.5
Water inlet ...............................................................3/4" stainless steel male thread
Waste water connection ..........................................3/4" stainless steel male thread
Connection H1 ........................................................3/4" stainless steel male thread
Connection H2 ........................................................3/4" stainless steel male thread
Nominal size compressed air coupling plug .............7.85 mm
Power supply compressed air control ......................230 V AC
Power supply to the solenoid valve ..........................24 V DC

2.1.2 Structure of the flushing device

Pressure gauge H1
Connection H1
Connection H2
Pressure gauge
H2
www.elector-water-treatment.com
Stainless steel frame
with transport handle
Compressed air
coupling plug
Drain
Check valve
Water inlet
Compressed air
controller
Waste water
Page 18