Technical Data - Scheppach GK240ofx Traduction Des Instructions D'origine

Remaining hazards
Remain attentive at all times when working, and keep third parties at a safe distance from
your work area.
Even if you use this electric power tool in accordance to instructions, certain residual risks
cannot be eliminated. Remaining hazards can be minimized by following the instructions in
„Safety instructions", „Intended Use" and in the entire operating manual.
The following hazards may arise in connection with the equipment's construction and lay-
out:
• The use of incorrect or damaged mains cables can lead to injuries caused by electricity.
• Avoid accidental starts: do not press the start button while inserting the plug into the
socket.
• Damage to hearing if no suitable ear protection is applied.
• Dirt particles, dust etc. can get irritate the eyes or face despite wearing safety goggles.
• Inhaling swirled up particles.
Keep this safety information in a safe place.

6. Technical Data

Mains connection
Motor rating
Operating mode
Compressor speed
Pressure vessel capacity
Operating pressure
Theoretical intake capacity
Theoretical delivery rate
Protection type
Weight of the unit
Max. altitude
(above mean sea level)
The noise emission values were measured in accordance with EN ISO 3744.
50 | GB
www.scheppach.com
220 - 240 V~ / 50 Hz
1100 W
S3 25%
3800 min
-1
24 l
approx. 8 bar
approx. 180 l/min
approx. 96 l/min
IP30
ca. 15 kg
1000 m