Cleaning, Maintenance, Storage And Ordering Spare Parts - Scheppach GK240ofx Traduction Des Instructions D'origine

This may have the following causes:
• Passage points, where connection cables are passed through windows or doors.
• Kinks where the connection cable has been improperly fastened or routed.
• Places where the connection cables have been cut due to being driven over.
• Insulation damage due to being ripped out of the wall outlet.
• Cracks due to the insulation ageing.
Such damaged electrical connection cables must not be used and are life-threatening due
to the insulation damage.
Check the electrical connection cables for damage regularly.
Make sure that the connection cable does not hang on the power network during the in-
spection.
Electrical connection cables must comply with the applicable VDE and DIN provisions.
Only use connection cables with the marking „H05VV-F".
The printing of the type designation on the connection cable is mandatory.
AC motor
• The mains voltage must be 230 V~
• Extension cables up to 25 m long must have a cross-section of 1.5 mm .
²
Connections and repairs of electrical equipment may only be carried out by an electrician.
Please provide the following information in the event of any enquiries:
• Type of current for the motor
• Machine data - type plate
• Machine data - type plate

11. Cleaning, maintenance, storage and ordering spare parts

m Important!
Pull out the power plug before doing any cleaning and maintenance work on the
equipment. Risk of injury from electric shock!
m Important!
Wait until the equipment has cooled down completely! Risk of burns!
m Important!
Always depressurize the equipment before carrying out any cleaning and maintenance
work! Risk of injury!
11.1 Cleaning
• Keep protective devices, air vents and the motor housing as free of dust and dirt as possible.
• We recommend that you clean the device directly after every use.
GB | 53
www.scheppach.com