Scheppach GK240ofx Traduction Des Instructions D'origine page 49

Safety instructions when using spraying attachments (e.g. paint sprayers)
• Keep the spray attachment away from the compressor when filling so that no liquid comes
into contact with the compressor.
• Never spray in the direction of the compressor when using the spraying attachments (e.g.
paint sprayers). Moisture can lead to electrical hazards!
• Do not process any paints or solvents with a fl ash point below 55 °C. Risk of explosion!
• Do not heat up paints or solvents. Risk of explosion!
• If hazardous liquids are processed, wear protective filter units (face guards). Also, adhere
to the safety information provided by the manufacturers of such liquids.
• The details and designations of the Ordinance on Hazardous Substances, which are
displayed on the outer packaging of the processed material, must be observed. Addi-
tional protective measures are to be undertaken if necessary, particularly the wearing of
suitable clothing and masks.
• Do not smoke during the spraying process and/or in the work area. Risk of explosion!
Paint vapours are easily combustible.
• Never set up or operate the equipment in the vicinity of a fire place, open lights or spark-
ing machines.
• Do not store or eat food and drink in the work area. Paint vapours are harmful to your
health.
• The work area must exceed 30 m³ and suffi cient ventilation must be ensured during
spraying and drying.
• Do not spray against the wind. Always adhere to the regulations of the local police author-
ity when spraying combustible or hazardous materials.
• Do not process media such as white spirit, butyl alcohol and methylene chloride with the
PVC pressure hose. These media will destroy the pressure hose.
• The work area must be separated from the compressor so that it cannot come into direct
contact with the working medium.
Operating pressure vessels
• You must keep your pressure vessel in good working order, operate the vessel correctly,
monitor the vessel, carry out necessary maintenance and repair work immediately and
meet the relevant safety precautions.
• The supervisory authority may enforce essential control measures in individual cases.
• A pressure vessel is not allowed to be used if it has faults or deficiencies that can endan-
ger workers or third parties.
• Check the pressure vessel for signs of rust and damage each time before using. Do not
use the compressor with a damaged or rusty pressure vessel. If you discover any dam-
age, then please contact the customer service workshop.
www.scheppach.com
GB | 49