wallas 22 Dt Mode D'emploi page 83

D30011
22 Dt / 30 Dt / 40 Dt
Device use
Ignition
The start-up process and heating is automatic.
The heater will ignite when the heating switch (3) is pressed continuously for more
than 2 seconds. A yellow heating indicator will light, indicating that the heating is
on.
A red combustion indicator light (1) will be lit when the burner flame has been ig-
nited and the combustion has stabilised after about five minutes after the ignition.
The whole process takes about 11 minutes.
1. Combustion indicator
2. Temperature adjustment / Power control
3. Heating switch
4. Power indicator
5. Thermostat indicator
Operation
1.
2.
3.
~ 20 °C
4.
(~ 68 °F)
5.
6.
1 2 8
5 7 6
6.
7.
8.
9.
- 83 -
~ 5 °C (~ 41 °F)
~ 11 °C (~ 52 °F)
~ 17 °C (~ 63 °F)
~ 23 °C (~ 73 °F)
~ 29 °C (~ 84 °F)
~ 35 °C (~ 95 °F)
3 9
4
Thermostat sensor
Ventilation switch
Ventilation indicator
Heating indicator
en
490526C