Dogtra RB 1000 Serie Mode D'emploi page 26

DESCRIPTION OF TRANSMITTER PARTS
LCD Screen
The LCD screen indicates the beeper mode
and the sound.
The battery life indicator shows: 3 bars =
full charge, 2 bars = medium charge, and 1 bar
= needs charge.
The LCD screen shows "r-P", when the
Run/Point button is pressed. On the other hand,
"-P-"is brought out on the LCD screen, when
the Point button is pushed down.
In order to confirm the current sound, push
down the Locate button on the side of the
transmitter. The Sound button allows choosing
among four different sounds of the
collar/receiver and the selected sound appears
on the LCD screen. (L1, L2, H1, H2)
48
DESCRIPTION OF TRANSMITTER PARTS
Care for LCD Transmitters in Cold Temperature
In cold temperatures (10 degrees F or below),
the LCD on your transmitter may be dim or slow
to respond. Wait until the display becomes
visible before selecting any mode.
Even though the LCD screen might be dim or
slow to respond, when you push the Locate
button, the transmitter will still function
properly. In the occurrence of extremely cold
weather, the LCD screen might take a moment to
respond.
In this situation it is ideal to wait until your
transmitter is back to working order. To check if
the unit works properly, change the sound slowly
listening to the beeper sound of the unit by
pushing down the Sound button on the left side
of transmitter.
Suggestion : Carry your remote close to
your body as your body's warmth can
improve operation and viewing of the LCD
screen.
49