Overview - Dogtra RB 1000 Serie Mode D'emploi

THANK YOU FOR PURCHASING
THE WORLD'S FINEST E-COLLAR
The
system will give you the ability to keep track of
your dog's location when he/she is out of sight
or on point.
The Dogtra RB Series are waterproof,
lightweight, and reliable. They are built to
withstand the most rugged conditions that your
dog may encounter.
The beeper has an audible 400-yard range,
which may vary with tough terrain and wind
conditions.
The use of microcomputer technology,
digital circuitry and Lithium-Polymer batteries
make both the collar and transmitter compact
and very reliable.
40
remote training

OVERVIEW

The
beeper with three different modes. The LCD
screen will display the mode on the front of the
transmitter. To activate the transmitter, press and
hold the blue button on the right side of the
transmitter until both the LCD and LED window
illuminates. Next, hold the two red dots on the
transmitter and receiver together until the
receiver light starts blinking. The
receiver/collar's LED window will blink green
every 4 seconds to show that the unit is on and
fully charged.
The
modes: Run/Point, Point-Only, and Locate.
Locate is available anytime by pressing the
top orange button on the left side of the
transmitter.
To activate the other beeper modes, press
the Run/Point button or Point button on the front
of the transmitter. In the Run/Point mode, it will
double beep every 7 seconds while the dog is
running. While the dog is on point or stationary
it double beeps every 2 seconds. In the Point-
Only mode, the unit will not beep while the dog
is moving (you can use the Locate mode for
locating your dog). When the dog points or
becomes stationary, the unit will emit a double
OVERVIEW
has a remote
has three beeper
41