Publicité
Les langues disponibles
Les langues disponibles
Regularly check the firm seating of the rack on the trailer tow bar as well as the attachment of the bicycles to
the rack. Also regularly check the functions of the lighting system of your bicycle rack.
Mounting the bicycles to the rack
2 x Tensioning strap, small
The first bicycle is placed in the first wheel rail (closest to the vehicle) and
secured to the U-bracket with the short frame holder. To do this, turn the
knob nut anti-clockwise until the frame clips are sufficiently widely opened
to fit your bicycle frame. Place the frame clips around the bicycle frame and
then turn the knob nut in a clockwise direction. The wheels are secured by
pushing the wheel stopper up to the wheel, placing the tensioning straps
around the wheel rim of your bicycle and tightening the straps.
Caution: The front wheel must also be secured to prevent it from turning using a small tensioning
strap. To do this, secure the front wheel to the rail again at a different position.
The second bicycle is usually placed in the second rail, facing the
opposite direction to the first and secured to the U-bracket with the
long frame holder. The wheels are secured in the same way as for the
first bicycle. It may be necessary to offset the individual bicycles
differently on the rack to ensure that the frame holders may be
correctly secured. Now secure the bicycles with the long safety strap.
Wrap the safety strap through the bicycle frames and the U-shaped
bar and tighten.
The bicycle rack may not
be used without this safety strap.
Folding out the bicycle rack
First remove the padlock.
If you wish to operate the folding mechanism, always hold
the U-bracket with one hand to ensure that the rack is not
able to fold out suddenly.
With the other hand, push the lever of the folding mechanism down.
Now you can fold the rack down carefully. Raising the rack platform
engages it back into the transport position. To secure the folding
mechanism during travel, hook the second padlock into one of the
drilled holes of the folding mechanism.
Maintenance and care
After use, store the bicycle rack in a clean and dry place. Wash any mud or other dirt off using water.
•
Keep the trailer coupling clean and free of grease
•
Keep the rack tow bar clean and free of grease.
•
Check the bicycle rack regularly for damages. Damaged or worn parts must be replaced immediately.
•
Only original replacement parts may be used.
Check the bolts and nuts of the bicycle rack regularly and tighten when necessary.
•
Immediately treat any damage to paintwork with paint.
•
Regularly lubricate rotating and moving parts.
•
Notes for environmental protection
Please dispose of this device via the recycling bin or the public/municipal collection points.
The materials can be recycled. You make an important contribution to protecting our environment by
recycling, material utilisation or other forms of reusing waste equipment!
Contact information
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Germany
Telephone: +49 (0)202 42 92 83 0
Internet:
www.eal-vertrieb.de
1 x Safety strap
Safety strap
Fax:
+49 (0)202 2 65 57 98
Email: info@eal-vertrieb.com
Publicité
