Table des Matières
Publicité
Output of electrical signals
General
Select an output range and select
74
DIRECT from the menu. It puts you
right in the output mode. For other
modes read section "Special Output
Functions". The lower part of the
screen shows the window for output
functions. Here, you can read the
output level labelled with either SET
or OUTPUT.
Set mode
In the SET mode you change the
output reading without changing the
actual output at the terminals. Once
you press EXE, the output will change.
to the new setting.
K0320 Issue No. 1
Publicité
Table des Matières
