Table des Matières
Publicité
52
K0320 Issue No. 1
To measure signals
General
Select an input range and select
DIRECT from the menu. It puts you
right in the output mode. For other
modes like scaled readings read the
chapter " Special Output Functions".
The upper part of the screen shows
the window for input functions. Here,
you can read the measured value.
Millivolts
Select mV and DIRECT in the input
menu and press EXE to open the
working screen. The upper window in
the working screen indicates the
measured millivolts reading.
The range is 0-600 mV split into two
(auto) ranges of 0 to 100 mV and
100.000 to 100.01 to 600.00 mV.
Publicité
Table des Matières
