Table des Matières
Publicité
42
K0320 Issue No. 1
Set-up
LCD screen viewing adjustments
Setting the backlight automatic shut
off mode
Leave the cursor at NONE at the
INPUT and OUTPUT menu and press
the # key to open the setup menu.
Select system and press EXE. Next
select the BACKLIGHT MODE and
press EXE.
The backlight timer can be set to
30 seconds, 5 minutes or off. select
appropriate choice and press EXE to
acknowledge. Press CE to leave the
setup menu.
NOTE: It is recommended to
switch the BACKLIGHT MODE on to
save batteries if the unit is mainly
used in the field.
Publicité
Table des Matières
