Table des Matières
Publicité
8
K0320 Issue No. 1
Introduction
The MCX-II calibrator
The Multi-Calibrator model MCX-II has
been designed for testing and
calibration of process instrumentation
and portable test equipment. The unit
provides data to comply with the
ISO9000 requirements for calibration.
The MCX-II can be used to measure
and output analog and digital signals
often used in an industrial
environment.
Also it can be used to simulate a
wide variety of temperature sensors.
Measurement and output/simulation
functions can be operated and read
simultaneously.
Pressure Measurements and Calibrations
A plug-in Pressure Module model
MCX-PM is optionally available for
pressure measurements and
calibration.
Automatic Calibration
To automate calibration routines and
to store calibration data the unit has
been provided with a memory card
slot.
For the same purpose the unit has a
RS232 cable connector to interface
directly with a Personal Computer.
To perform automatic calibration, in
the field or in the workshop, the MCX-
II is supported by Intecal software. The
software package and Memory Cards
are optionally available from your local
GE Sales Office or Distributor.
Publicité
Table des Matières
