Output Mode; Changing The Output Level - GE Druck MCX-II Guide De L'utilisateur

76
K0320 Issue No. 1
Output of electrical signals

Output mode

In the OUTPUT mode you change both
the output reading and the actual
output at the terminals. Entering a new
value through the numerical key-pad
brings you back into the SET mode.

Changing the output level

Use the and keys to ramp the
output signal manually. Holding the
key down will gradually accelerate
the adjustment speed.
Enter a new output value through the
numerical key-pad and press EXE to
activate the signal at the output
terminals. Entered values outside the
range will prompt the message
OUTSIDE RANGE.