Table des Matières
Publicité
34
K0320 Issue No. 1
Set-up
Temperature readings
Temperature simulations and
measurements can be shown in either
Celsius or Fahrenheit units. Factory
setting is Celsius. Readings are based
on either IPTS 68 or ITS 90
temperature scales.
Factory setting is ITS 90.
Changing the temperature unit
Leave the cursor at NONE at the
INPUT and OUTPUT menu and press
the # key to open the setup menu.
Select TEMP.SETTINGS and then the
temperature unit. Press EXE to
change.
Publicité
Table des Matières
