Switching Off; Remote Control - EQUATION EQ 10 Manuel D'installation, D'utilisation Et D'entretien

4.12 Switching off

Press the off button for two seconds in order to turn off the stove. The closing process is activated at this time. Do not unplug
the stove from the power supply during the closing process since a fan and a smoke extraction engine continue in operation
until a probe detects that there is no smoke and there is a proper safety temperature.
In case the stove is blocked for any reason, wait for the stove to cool completely, look for the cause of the block, and if the
problem is solved, turn on again.
IMPORTANT: CHECK THE SCREEN FOR THE REASON OF THE BLOCKING IN CASE A TECHNICIAN INTERVENTION
IS NEEDED

4.13 Remote control

The product contains a remote control (see attached photo) which makes it possible to control the stove from a distance.
Pressing key 1 turns on the stove.
Room temperature is decreased by pressing the key 2 and increased by pressing the 3 button. In this way the
operation will be automatic.
The requested power level can be decreased by pressing the button 5 and increased by pressing the key 4.
The function in this case will be in manual mode.
NOTE: the remote control, to transmit the signal to the heater should be directed always to the control panel which is located
where the reception of infrared LED is found. If the LED is on, everything that is requested with the remote will be accompanied with a
sound
4.14 Parameters adjustmentt
Enter into the technical menu by pressing the 1 button for at least 5 seconds (on/off) and by pressing the key 2 (temperature
rise)
This menu allows you to adjust the main parameters which manage the function of the stove. This menu is only accessible to
the personal of the technical assistance Center. This menu will require an access code (password).
119