EWM KM 120-S Notice D'utilisation page 67

V-200716
Operating manual
► Push the double guard back.
► Insert the bolts.
► Tighten the nuts to the specified
tightening torque.
Remove the first guard V/O
► Unscrew the nuts on the first guard
V/O and remove the bolts.
► Remove the first guard V/O from
the profile bar.
Attach first guard V/O
► Position the first guard V/O below
the profile bar.
► Insert the bolts.
► Tighten the nuts to the specified
tightening torque.
67