OPERATION
Cleaning appliance
Cleaning parts in contact
Cleaning the container
Cleaning at commissioning
Checking microswitch
Checking thermostat
TROUBLESHOOTING
Whenever the appliance does not work properly, try to solve the less se-
rious problems using this table.
FAULT
The appliance does not
turn on.
In the cooking compart-
ment there are stains
The light indicators do
not turn on.
If the problem cannot be resolved, turn the appliance off, disconnect it
from the electrical mains and shut all the supply valves. Then contact au-
thorized customer service
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
with foodstuff
Cleaning flue
POSSIBLE CAUSE
The master switch is
•
not connected.
The residual current
•
device or circuit brea-
ker has tripped.
Quality of the water.
•
Ineffective detergent.
•
Insufficient rinsing.
•
The master switch is
•
not connected.
The residual current
•
device or circuit brea-
ker has tripped.
- 17 -
MAINTENANCE
FREQUENCY
Daily
Daily
In case of need
Upon arrival after installation
Yearly
Yearly
Yearly
INTERVENTION
Connect the master
•
switch.
Restore the residual
•
current device or circu-
it breaker.
Filter the water (see
•
water softener).
Use the recommended
•
detergent.
Rinse once again.
•
Connect the master
•
switch.
Contact authorized te-
•
chnical assistance and
consult the Technical
Manual.
8.
EN