Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Specifications
Configuration Record
Use the following sheet to record the configuration settings.
1
2
Protocols in use _______1 to 5 protocols.
3
Modify protocol _______YES - to allow modify in SET.
4
Handset Mode _______A, B or C.
5
Delayed Callback _______YES - callback alarm after 2 mins
6
Display Sleep _______YES - display blank after 2 mins.
7
Chirp low alarms _______YES - "chirp" alarm.
8
Continuous infusions _______YES - Continuous infusions.
9
Loading doses _______YES - Loading dose available.
10
Max dose limits _______YES - Dose limits available.
11
Variable dose rates _______YES - Variable rates available.
12
Comms pump identity _______Use arrows to set pump identity in range "1" to "127".
13
Comms enabled _______YES - Communications enabled.
14
Nurse call _______YES - Nurse call connector enabled.
15
Nurse call inverted _______YES - Nurse call inverted enabled.
16
Continuous Print _______YES - Continuous printed enabled.
17
Default syringe _______YES - Default syringe enabled.
18
Lock syringe type _______YES - Syringe type locked to default syringe.
19
Quiet mode _______YES - Quiet mode enabled.
26 / 120
Icons _______YES - Display icons.
_______NO - Icons off.
_______NO - to disable.
_______NO - call-back will be cancelled for up to 2 mins or extended
to 15 mins. To extend call-back alarms, press and hold the
stop key for 4 seconds. This allows the time to be extended.
_______NO - display stays on.
_______NO - no "chirp" alarm.
_______NO - Disabled.
_______NO - Disabled.
_______NO - Disabled.
_______NO - Disabled.
Default setting is "0 0 0".
_______NO - Communications disabled.
_______NO - Nurse call connector disabled.
_______NO - Nurse call inverted disabled.
_______NO - Continuous print disabled.
_______NO - Default syringe disabled.
_______NO - Syringe type not locked to default syringe.
_______NO - Quiet mode disabled.
5001FAOPT71 ISS 8.0
Publicité
Table des Matières
