Pre-Set Protocol Set Up - IVAC P5000 Mk II Mode D'emploi

Configured Options

Pre-Set Protocol Set Up

Pre-set Drug names and safety limits apply to pre-set protocols during protocol selection and
modification.
1. Turn key switch to SET position while
pressing down START button.
2. Enter access code using rate selection
arrows.
3. Enter first digit and press NEXT indicated
on the screen.
4. When the complete code has been entered
press ENTER.
5 Select PROTOCOL DEFAULT SET-UP
from the menu. Press ENTER.
6. Press MODIFY PROTOCOL to display
current protocol summary. Use ARROWS
to highlight a field, press ALTER to enter
that field and "+" and "-" arrows to select
desired values.
7. When field is correct press CONFIRM or
CANCEL. Press OK to return to protocol
summary.
One of the five drugs programmed in the Drug Names and Safety Limits are
selectable for each protocol. Additionally a default drug with limits set to
extremes may be chosen and is indicated by "
22 / 120
Note:
DRUG ".
5001FAOPT71 ISS 8.0