Clock Set; Important - IVAC P5000 Mk II Mode D'emploi

The internal clock is used to record patient history.
The internal clock is the reference against which the PCAM unit stores patient
history and events. Changing the clock will automatically reset the dates against
which all new patient history is stored in the unit and may effect the presentation
of the history graphs
Patient history should always be recorded and, if required, printed prior to
changing the clock.
5001FAOPT71 ISS 8.0
Configured Options
1. Turn key switch to SET position while
pressing down START button.
2. Enter access code using the rate selection
arrows.
3. Enter the first digit using the selection
arrows and press NEXT indicated on the
screen.
4. When the complete code has been
entered press ENTER.
5. Select CLOCK SET from Menu. Press
ENTER.
6. Display will show current date and time
programmed into unit.
7. UP/DOWN ARROWS
Use "+" and "-" arrows to change values in
the highlighted field. When entry is correct
press NEXT to move highlight from left to
right.
8. Press OK to save the date and time.

Important:

Clock Set

21 / 120