Endress+Hauser RIA452 Mode D'emploi page 109

RIA452
Function
(menu
item)
Display sw. 0 to 99 sec
0
Ref. bargraf Input
Lintab
Dec. point XXXXX
XXXX.X
XXX.XX
XX.XXX
X.XXXX
Bar 0% -99999..99999
0.0
Bar 100% -99999..99999
100.0
Bar rise Right
Left
Endress+Hauser
Parameter setting Description
Selectable period for displaying the individual values if
combinations of display values have been selected
under Ref. num.
This setting can only be selected if the pulse output or
integration option is available and has been configured.
Selects the signal source for the bar graph
Number of digits after the decimal point for bar graph
scaling.
Start value for the bar graph
End value for the bar graph
Bar graph orientation.
• Right = 100% value (rising from left to right)
• Left = 100% value left (falling from left to right)
Commissioning
109